Menu

Center Cargo Apron, Phase 2 (Airside Development)

Advertisement for Bids
Center Cargo Apron, Phase 2 (Airside Development)
Greenville Spartanburg Airport District (GSP)
Greer, South Carolina
EDA Investment No. 04-79-07736

Sealed bids will be received by the Greenville Spartanburg Airport District in the Airport Administrative Offices/Terminal Building (on Level 2), 2000 GSP Drive, Suite 1, Greer, SC 29651, up to 11:00 AM, Thursday, December 15, 2022, and immediately thereafter publicly opened and read for the furnishing of labor, material and equipment for the Center Cargo Apron, Phase 2 project. Bids received after the stated time will not be accepted.

The Center Cargo Apron, Phase 2 (Airside Development) project will be partially funded with Federal funds from the United States Department of Commerce, Economic Development Administration (EDA Investment #04-79-07736); therefore the project is subject to the laws and regulations associated with the respective programs. All federal requirements will apply to the contract. All contractors and subcontractors are required to be registered in the federal System for Award Management (SAM). Bidders on this work will be required to comply with the President’s Executive Order No. 11246 & Order No. 11375 which prohibits discrimination in employment regarding race, creed, color, sex, or national origin.  Bidders must comply with Title VI if the Civil Rights Act of 1964, the Davis-Bacon Act, the Anti-Kickback Act, the Contract Work Hours and Safety Standards Act, and 40 CFR 33.240. Bidders must also make positive efforts to contract with small and minority-owned businesses when possible.  Attention of bidders is particularly called to the requirements as to conditions of employment to be observed and minimum wage rates to be paid under the contract.  “Equal Employment Opportunity”.

The project will provide an airfield apron pavement extension and a roadway extension. The paving project will include excavation, crushed aggregate base, portland cement concrete pavement, asphalt roadway pavement, stormwater system improvements, and airfield pavement marking. The project area will also include extensions of existing utilities and the installation of temporary chain link fencing.

The Contractor is responsible for obtaining all required building permits and for providing documents sealed by a South Carolina Professional Engineer as necessary.

It is anticipated that the contract award will be made to the lowest responsive and responsible bidder if an award is made. Contractors will also have the opportunity to submit a combined bid with this project and the General Aviation Development Area – Phase 1A Paving project (see GSP Plan Room Website for this Project Advertisement).

Proposals must be submitted in sealed envelopes with the Bidder’s name, full mailing address, and General Contractor License Number shown as the return address. Sealed envelopes shall be addressed to:
Greenville Spartanburg Airport District
Katie Eleam, CM, Project Manager
2000 GSP Drive, Suite 1
Greer, SC 29651

Proposals submitted without the prescribed information may be rejected.

All Bidders should be aware that the date, time, and location for Proposal Submittal and Opening may be
modified by Addendum.

A non-mandatory pre-bid meeting will be held via Microsoft Teams on Thursday, December 1, 2022, at 2:00 PM. All bidders are strongly encouraged to attend. Invitations (a link to join the meeting) must be requested by sending an email to kerwin@wkdickson.com.

  • Version
  • Category
  • File Count 8
  • Issued Date November 14, 2022
  • Due Date December 15, 2022
  • Last Updated November 30, 2022

Files

FileAction
2022-11-14_GSP CNTR CARGO PH 2_IFB Plan Set.pdfDownload
2022-11-14 Cntr Cargo Ph 2 Front End & Specs_Final (1).pdfDownload
1a TOC Add 1.pdfDownload
5b-GSP Sch Cargo Ph2 20221129 Add 1 Cargo Ph 2 Combined.pdfDownload
5b-GSP Sch Cargo Ph2 20221129 Add 1 Cargo Ph 2 Standalone.pdfDownload
2022-11-29 GSP Cntr Cargo Ph 2 Add 1 Memo.pdfDownload
GSP Schedule of Work Cargo Ph2 2022-11-29 Add 1 Blank Excel.xlsDownload
P-306_v10H-Errata Add #1.pdfDownload
Scroll to Top

Search the Keywords...